The height of the bathtub and material,how to choose?

Bathtubs are decorated in the bathroom for the past few years. They are not only good at soothing the body and mind but also healthy and healthy. However, the height of the Bathtub can be extraordinarily high. It is more appropriate to have a bath, especially for children. The family, if too high, is not good for the baby; if it is too low, there is no way to take a bath. So, the following Xiao Bian and everyone will talk about the height of the bath is generally?

Bathtub specifications

The size of the bathtub is not only about the size of the space, but also directly related to the functional design of the bathtub. The average length of the bathtub ranges from 1.2 meters to 1.7 meters and the depth is 50 to 70 centimeters. Bathtubs less than 1.5 meters in length tend to be deeper than normal bathtubs, about 70 centimeters deep. This is often referred to as a sitz bath. Since the area of the bottom of the cylinder is small, this bathtub is easier to stand than a normal bathtub, saving space and not affecting use. Comfort.

Bathtub height and size

1. The size of the bathtub should be determined according to the size of the bathroom. If it is determined that the bathtub is installed in the corner, triangle-shaped bathtubs usually occupy more space than rectangular bathtubs.

2. Bathtubs of the same size have different depths, widths, lengths, and contours. If you like the depth of water, the location of the waste outlets should be higher.

3. For bathtubs with skirts on one side, when buying, pay attention to the direction of the skirt according to the location of the drains and walls. If you buy the wrong bathtub, you cannot install it.

4, if you need to add shower head above the bathtub, the bathtub to choose a little bit wider, the bath position below the shower position to be flat, and should be anti-slip treatment.

Bathtub material

When choosing a bathtub, it is very important to determine the material you want, and distinguish it from the manufactured material. Generally, it is divided into an acrylic cylinder, a steel plate cylinder, and a cast iron bathtub. Bathtubs of different materials have different characteristics.

1, steel plate enamel bathtub enamel surface is easy to transport, handling, but not intolerable impact, insulation is not good.

2. The cast iron bathtub has strong and durable gloss, good acid and alkali resistance, but it is bulky and difficult to handle and install.

3, Acrylic bathtub shape changeable, light weight, good insulation effect, but because of the hardness is not high, the surface is prone to scratches. The current market share is relatively large.

4. The pearl bath has a smooth surface and a pearl-like luster. It is sturdy and durable, with good heat preservation and easy weight installation.

Bathtub buying tips

1, than the thickness. You can tap the bathtub to judge the thickness of the bathtub. The thickness of the bathtub is large and naturally it will not crack.

Listen to the sound. When buying a jacuzzi, pay attention to the size of the motor sound. To buy a high-end bathtub, it is best to “test water” at the time of purchase, listen to the sound, and try the temperature.

3, see the gloss. Look at the surface gloss to understand the pros and cons of the material, suitable for any kind of material bath.

4, touch smooth surface smoothness. Applicable to steel plate and cast iron bathtubs, because both baths need to be enamel plated, and the plating process will not produce fine ripples.

5, hand press, foot test firmness. The firmness of the bathtub is related to the quality and thickness of the material. The visual inspection is invisible. You need to try it yourself. For example, if you stand in, there is a feeling of sinking.

6, choose brand bathtub. In general, brand-name sanitary ware products, such as the bathtubs of the top ten sanitary ware brands, can provide consumers with more confidence in quality and after-sales service.

Check whether the level, front and rear, left and right positions are appropriate, check whether the drainage facilities are appropriate, and install firmly. During the installation process, anti-dirty, anti-collision and anti-clogging facilities shall be adopted for the bathtub and the launching facilities. The sparks of the angle grinder and the spot welding machine should not be Spilled on the bathtub, otherwise it will cause damage to the glaze and affect the appearance of the bathtub.